soak time
英 [səʊk taɪm]
美 [soʊk taɪm]
网络 保温时间; 预备时间; 保压时间; 浸泡时间; 保持时间
双语例句
- The utility model shortens the soak time of the perforating fluid to the stratum and avoids a secondary pollution to the oil layer during a pulling operation process.
缩短射孔液对地层的浸泡时间，避免了起下作业过程中对油层的二次污染。 - Study on the Optimum Soak Time of Ginsenosides with Soak Mothod
浸渍法提取人参皂苷最佳浸泡时间的研究 - Rational soak time is: steam cavity of oil reservoir disappeared, decreasing speed is stable in the temperature field, and decline degree of pressure is stable.
当油藏汽腔消失，温场降速平稳，压力下降幅度平稳时，即为合理的焖井时间。 - Rational injected steam volume and soak time can be known through downhole monitoring of thermal regime.
通过井下热动态变化监测，可确认合理的注汽量和焖井时间。 - Alpinia Officinarum Hance: Soak time 0 hr, thick powder, extract time 3 hrs, and to add water with 1 ∶ 10; Curcuma Wenyujin Y.
高良姜：浸泡时间0h，粉末粒度粗，提取时间3h，加水比1∶10； - For a long period of time, the determination of soak time relies on field experiences without a theoretic basis.
长期以来，人们对于焖井时间的确定主要依靠现场的经验，没有一个可靠的理论依据。 - Study of Microbiological Leaching Technology of Copper Ore soak and dissolution time of sulphuric acid is 12h.
微生物溶浸铜矿研究硫酸浸溶时间为12h。 - The paper discusses coke adsorption on water and the related question with water, coke temperature and soak time. It suggests that the coke containing water or moisture more than 7% should be dried in order to achieve the goal of iron-smelting production smoothly.
探讨了焦炭吸水性与水温、焦炭温度、浸泡时间有关，提出水分含量大于7%的焦炭，需要烘干处理，达到炼铁生产顺行的目的。 - The Optimal Soak Time and Temperature of Germ Recovery for the Modified Dry-Grind Process of Ethanol Production
胚芽回收的最佳浸泡时间和浸泡温度选择 - Effect of Soak Time on the Seed Germination in Asparagus Lettuce
浸种时间对莴笋种子萌发的影响 - The test showed that the simulated results were influenced greatly by the soak time after heating, the current density and the sample shape.
实验发现加热毕后停留时间、线圈的电流密度、试样形状等对模拟结果有很大影响。 - Soak time is 19 hours.
浸渍时间：19小时。 - Methods: Use orthogonal test, act the swimming ability, soak time, decoct extraction time as changing factor, select L9 ( 34) table to conduct test.
方法：采用正交设计法，以加水量、浸泡时间、煎提时间为可变因素，选用L9（34）表进行试验。 - The analysis of orthogonal experiments of technological parameters indicated that precursor concentration, ammonia concentration and hydrothermal temperature had greater influences on the properties of optical-electrical, in contrast to that of the soak time.
试验结果表明：影响薄膜光电性能的主要因素是前驱物浓度，其次是氨水浓度和保温温度，保温时间对薄膜光电性能的影响较小。 - Study on gold leaching performance of biologicals soak and dissolution time of sulphuric acid is 12h.
生物制剂浸金性能研究硫酸浸溶时间为12h。 - Methods: The process was studied by orthogonal design method with the extraction ratio of the oil as criteria, and three factors were chosen, including the soak time, the decoct time and the water amount.
方法：以挥发油提取量为指标，以浸泡时间、提取时间、加水量为因素进行正交实验。 - Controling drilling fluid density scientifically, reducing soak time of payzone, and meanwhile strengthening research, testing and application of ultralow-density drilling fluid and completion fluids.
同时还应加强对超低密度钻井液、完井液的研究、应用与试验工作，重视对油气层保护的人才培训。 - The effect of mud invasion into formation and mud soak time in formation on the dual laterolog and dual induction log can be known through time-lapse logging, which is important to determine oil saturation exactly and reduce the mud invasion influence.
利用时间推移测井找出泥浆浸泡时间对油气层双感应、双侧向测井浸入规律，为准确确定含油饱和度、减小泥浆侵入的影响有着很重要的作用。 - The effect of temperature for terminal electrode firing and soak time on the clamping voltage ratio was investigated.
通过对烧端工艺中不同烧端温度以及保温时间的试验，研究了它们对片式ZnO压敏电阻器限制电压比的影响。 - Methods With dry extract rate and naringin content as the inspection indicators, orthogonal test was used to investigate the influence of four extracting factors ( water volume, extracting time, times of extracting and soak time of herbal) on the extracting process.
方法以浸膏得率和柚皮苷含量为考察指标，采用正交试验法，考察加水量、提取次数、提取时间、药材浸泡时间4个因素对提取工艺的影响。 - The higher the fluorine content in the fluxes was and the longer the soak time of the fluxes in the water was, the more the fluorine would transfer into the water.
保护渣中氟含量越高，保护渣在水中的浸泡时间越长，渣中氟向水中的转移量就越多。 - During microwave-assisted extraction, influence of the following factors on the extraction percent of salidroside was investigated: solid-liquid ratio, soak time, microwave power, microwave radiation time, and stirring time.
对于微波辅助提取法，主要考察了固液比、浸泡时间、微波功率、微波处理时间以及磁力搅拌时间对红景天苷提取率的影响。 - For ultrasonic extraction, the factors investigated included solid-liquid ratio, soak time, ultrasonic power, ultrasonic time, and ultrasonic temperature.
超声波提取法主要考察了固液比、浸泡时间、超声功率、超声时间以及超声温度对提取率的影响。 - The larger the dosage of PANI-DBSA in composite film, the better the anticorrosive quality. With the soak time being prolonged, the pH of system medium being increased, the anticorrosive quality of the composite film gradually declines.
复合膜中PANI-DBSA的用量越大，其耐腐蚀能力越好；随着浸泡时间的延长，体系介质的pH增大，复合膜的耐腐蚀能力逐渐减弱。 - The content of the Rhy in the Leachate as the quota, studying the affection on the extraction process by ethanol concentration, ethanol dosage, soak time and flow rate.
以渗滤液中钩藤碱的总含量为考察指标，研究乙醇浓度、乙醇用量、浸泡时间和流速对提取工艺的影响。